RISLONE ENGINE OIL MOTOR FLUSH

  • Cleans
  • Preventative maintenance
  • Cleans internal engine parts
  • Removes harmful deposits
  • Use before changing oil

Pouring fresh oil into a dirty engine is not ideal, as it will quickly become contaminated with left over sludge and harmful deposits that are left behind after draining oil. With today’s modern vehicles they tend to work hard, and run hotter than older engines, plus there is an extended time between servicing, which means there is a longer period for sludge to build up.

During a regular oil change, oil is drained from the engine, however much of the sludge and harmful deposits are left behind. This can be potentially dangerous for your engine if not removed. 

Using Rislone Engine Oil Motor Flush before every oil change will clean the engines internal parts and remove harmful sludge and deposits. Once fresh oil is installed, it will stay cleaner longer then it would without using Rislone Engine Oil Motor Flush and it will be able to perform at its optimum.

Rislone Engine Oil Motor Flush works on ALL 4, 6 and 8 cylinder vehicles including petrol, LPG and diesel. Works with conventional, high kilometre and synthetic engine oil.

DIRECTIONS:

  1. Add entire bottle of Engine Oil Motor Flush to engine crankcase before oil change.
  2. Idle engine for 10 to 15 minutes. Do not drive vehicle.
  3. Turn vehicle off and drain oil while engine is still warm.
  4. Follow normal procedure for oil and filter change.

NOTE: Very dirty or heavily sludged engines should be followed up with cleaning of the oil pan, sump pickup tube and rocker cover(s).



CODE: 44131

$13
.00
+ GST

Quantity:


Product Resources


You may also like...