3M 16113 PPS MINI INTRO KIT 200 MICRON 150ML

"3M™ PPS™ Mini Intro Kit contains 2 each PPS™ re-usable Mini Cups and Collars, 50 disposable PPS™ Mini Lids (with 200 micron filters) and Liners, 20 PPS™ Plugs, 2 PPS™ Mini Mix Ratio Film Inserts and 1 Mini PPS™ dispenser. for use with the 3M™ Paint Preparation System. This starter kit will provide basic supplies to use with our paint preparation system. Always reference the Paint Manufacturer to ensure the recommended filter to strain the paint material. This Mini PPS™ kit allows technicians to mix graduated measurements of up to 6 fluid oz (180 mL) when used with a mix ratio film insert or by weight scale. Mini Size PPSTM is ideal for 1-panel repairs. PPS™ is a all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption, reduces solvent usage by up to 70 percent, and improves the operator’s efficiency by up to 50 percent between the prep (mixing, measuring, and filtering) and clean-up time (time associated with cleaning the paint reservoir and spray gun). PPS™ eliminates the need for traditional mixing cups and filters. With conventional paint cup systems, a painter needs to mix paint materials in a separate cup, then transfer (or strain) the paint through a filter into a paint reservoir. Every time the painter transfers paint material, there is waste associated in the mixing cup and filter. With PPS™, place PPS’s disposable liner within the re-usable PPS™ Cup. Then simply mix the paint material in PPS’s disposable liner, snap-in place the disposable lid (with the pre-welded-in filter), and attach the locking collar to complete the PPS System and you are ready to spray. After spraying the Painter has a choice of using a sealing plug to temporary store non-catalyzed paint materials or clean-up. Since the liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. Simply throw the disposable lid and liner in the appropriate approved waste containers specified by the Paint Manufacturers (or local government requirements) and use a small amount of solvent required for cleaning the spray gun and the PPS™ adapter. It is possible to clean your paint gun with as little as 3 fluid ounces (90mL) of solvent. Specifically designed PPS™ stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun. Painters have also the choice to use no adapters by using 3M HG series Accuspray™ spray guns and further reducing cleaning solvent usage, while improving productivity. Since the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination, and less time spent mixing, filtering, and clean up, often improving productivity in prep and clean-up time by as much as 50 percent. With PPS™, your spray gun functions at any angle, even upside down. PPS™ enables the painter the ability to spray consistently 90 degree to the part, no matter the part orientation (even upside down). This not only improves consistent material transfer, which improves quality, but also reduces paint overspray, and improves paint consumption. Many painters mix more paint than they need to reduce the chance of starving the gun, and account for waste associated with overspray."
  • 3M™ Paint Preparation Systems (PPS™) Mini Intro Kit; PN 16113
  • Intro kit contains 2 PPS™ Mini Cups and 2 PPS™ Locking Collars, 50 PPS™ Mini Lids and Liners, 20 PPS™ Sealing Plugs, 2 PPS™ Mini film mix ratio inserts and 1 Mini PPS™ dispenser
  • Conventional Gravity Cup systems, paint is mixed and measured in mixing cups, then strained through filters into a paint reservoir, where there is often considerable paint waste
  • PPS™ is an all-in-one disposable solution for measuring, mixing, filtering, and spraying of Paint Materials
  • System enables the Painter the ability to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down), often reducing paint consumption


CODE: 60440096646

$260
.18
+ GST

Quantity: